Flex Tools Hammer Drill, Impact Driver, 7-1/4" Circular Saw, Oscillating Multi-Tool, Reciprocating Saw and Work Light Combo Kit FXM601-2B

Conquer the jobsite with this six-piece kit that combines the powerful cutting capabilities of the FLEX 7-1/4" Circular Saw and Reciprocating Saw with the torqued-out 1/2" 2-Speed Hammer Drill and 1/4" Hex Impact Driver. Plunge, trim, and grind with the rigorous Oscillating Multi-Tool, and command ultimate jobsite visibility with the Work Light. Total FLEX 24V cross-compatibility also means these tools share the FLEX Advantage of unmatched 24V battery power, runtime, and fast charging speed. Kit includes all six tools, two 24V batteries, and one charger.

Protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at registermyFLEX.com through December 31, 2024.

Features:

• FX5111 WORK LIGHT — 300 lm for high illumination
• FX2271 RECIPROCATING SAW — Orbital and Linear Mode at 1-1/4" SPM - 4000RPM
• FX1351 1/4" HEX IMPACT DRIVER — 1,800 in-lbs of torque & 3,400 RPM
• FX2141 7-1/4" CIRCULAR SAW — Powerful 2-9/16" depth of cut - 5,800 RPM
• FX1251 1/2" 2-SPEED HAMMER DRILL — 750 in-lbs of compact power - 35,200 IPM
• FX4111 OSCILLATING MULTI-TOOL — 20,000 OPM for a high speed of cut and vibration suppression
• SENSOR-FREE BRUSHLESS MOTOR — Every FLEX 24V tool is built around an intelligent digital brushless motor designed to eliminate friction and optimized for higher efficiency and power
• FLEX 24V CROSS-COMPATIBILITY — Compatible with all FLEX 24V batteries, chargers, and tools. This kit includes (1) 2.5Ah Lithium-Ion Battery, (1) 5.0Ah Lithium-Ion Battery and 160W Fast Charger
• FLEX 24V POWER — 6 Tools, 2 Batteries, 1 Charger
• FLEX LIMITED LIFETIME WARRANTY — Register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2024 to receive a limited lifetime warranty
• THE FLEX ADVANTAGE — 20% more power with 24V lithium, 25% longer runtime with THERMA-TECH™ heat management, up to 50% faster charging with high-power, dual fan chargers

Specifications:

• Oscillating Multi-Tool [FX4111]:
• No-Load Speed — 10,000-20,000 OPM
• Oscillating Angle Left/Right — 4° (+/-2°)
• Accessory System — Starlock
• Number of Speed Settings — 5
• Tool Weight (without battery) — 2.8 lbs, 1.3 kg
• Accessories Included:
• Depth Guide
• 1-1/4" (32mm) Bi-Metal Plunge Cut Blade
• 1-1/4" (32mm) High Carbon Steel Plunge Cut Blade
• Reciprocating Saw [FX2271]:
• Stroke — 1-1/4 in, 32 mm
• No-Load Speed — 0-3,000 SPM
• Tool Weight (without battery) — 7.4 lbs, 3.4 kg
• Accessories Included:
• 9" (229 mm) 6TPI Nail-Embedded Wood Demolition Blade
• 6" (155 mm) 8/11TPI Thick Metal Demolition Blade
• 1/2" 2-Speed Hammer Drill [FX1251]:
• No-Load Speed — 0-600/0-2,200 RPM
• Impact Rate — 0-9,600/0-35,000 IPM
• Peak Torque — 750 in-lbs, 85 Nm
• Clutch Settings — 24+D+H
• Chuck Capacity — 1/2 in, 1/2 po, 1/2 pu
• Chuck Type — Metal single-sleeve keyless ratchet
• Tool Length — 7 in, 178 mm
• Tool Weight (without battery) — 3.3 lbs, 1.5 kg
• Accessories Included:
• Belt Clip
• Bit Holder
• 1/4" Hex Impact Driver [FX1351]:
• No-Load Speed — 0-3,400 RPM
• Impact Rate — 0-4,000 IPM
• Max. Torque — 1,800 in-lbs, 203 Nm
• Collet — 1/4 in Hex
• Tool Length — 5.2 in, 131 mm
• Tool Weight (without battery) — 2.4 lbs, 1.1 kg
• Accessories Included:
• Bit Holder
• Belt Clip
• #2 Phillips Bit
• T25 Bit
• 7-1/4" Circular Saw [FX2141]:
• Saw Blade — 7-1/4 in, 184 mm
• No-Load Speed — 5,800 RPM
• Bevel Capacity — 0-56°
• Arbor — 5/8 in, 16 mm
• Cut Capacity at 90° — 2-5/8 in, 66 mm
• Cut Capacity at 45° — 1-7/8 in, 48 mm
• Tool Weight (without battery) — 9lbs, 4kg
• Accessories Included:
• 7-1/4" FLEX Blade
• Vacuum Adaptor & Lower Guard Lever
• Blade Wrench
• Work Light [FX5111]:
• Max. Lumens — 300lm
• Rotation — 104°
• Runtime — Up to 11 hours on a high mode 2.5Ah Battery

Includes:

• 7-1/4" Circular Saw
• 1/2" 2-Speed Drill Driver
• 1/4" Hex Impact Driver
• Oscillating Multi-Tool
• Reciprocating Saw
• LED Work Light
• 2.5Ah Lithium-Ion Battery
• 5.0Ah Lithium-Ion Battery
• 160W Fast Charger
• Assessories Listed In Specifications
• FLEX Bag

Additional Information:

• Manual — Work Light [FX5111]
• Parts Diagrams — Work Light [FX5111]
• Manual — Reciprocating Saw [FX2271]
• Parts Diagrams — Reciprocating Saw [FX2271]
• Manual — 1/4" Hex Impact Driver [FX1351]
• Parts Diagrams — 1/4" Hex Impact Driver [FX1351]
• Manual — 7-1/4" Circular Saw [FX2141]
• Parts Diagrams — 7-1/4" Circular Saw [FX2141]
• Manual — 1/2" 2-Speed Hammer Drill [FX1251]
• Parts Diagrams — 1/2" 2-Speed Hammer Drill [FX1251]
• Manual — Oscillating Multi-Tool [FX4111]
• Parts Diagrams — Oscillating Multi-Tool [FX4111]
• Register your product